Investigation of rib effects on deformation in plastic part made from polypropylene

In this study, the effects of the ribs on the deformation of the plastic part were investigated. In this context, four different rib parameters have been selected, namely the rib thickness, the rib height, the rib angle and the radius at the bottom of the feds. 5 different heights, 5 different thicknesses, 5 different radiuses and 3 different rib angles were used for designing of plastic part and analyzing of the mechanical properties of the plastic part. Resistance of the plastic part according to the identified parameters was determined by analyzing with Ansys software. According to this study, the increase in rib height reduces the deformation rate of plastic part by about 49%. In addition, was found that rib thickness reduce the amount of deformation rate by 44%.

Polipropilen malzemeden üretilmiþ plastik parçada federlerin deformasyon üzerindeki etkilerinin araþtýrýlmasý

Bu çalýþmada, federlerin plastik parçanýn deformasyonuna etkileri incelenmiþtir. Bu baðlamda, feder parametresi olarak feder kalýnlýðý, feder yüksekliði, federin açýsý ve federlerin dip kýsmýndaki yarýçapý olmak üzere dört farklý feder parametresi belirlenmiþtir. Plastik parçanýn mekanik özeliklerini analiz edebilmek 5 farklý yükseklik, 5 farklý kalýnlýk, 5 farklý yarýçap ve 3 farklý feder açýsý belirlenerek tasarým yapýlmýþtýr. Plastik parçanýn belirlenen parametrelere göre mukavemeti Ansys yazýlýmý ile analiz yapýlarak tespit edilmiþtir. Bu çalýþmaya göre, feder yüksekliðinin artmasý deformasyon oranýný yaklaþýk %49 azaltmaktadýr. Ayrýca, feder kalýnlýðý ise deformasyon miktarýný %44 oranýnda azalttýðý tespit edilmiþtir.