Pamukkale Univ Muh Bilim Derg: ()
Ahead of Print
<< Back
1.15 Serbeslik Dereceli Myoelektriksel Kontrollü Proztez Elin Tasarımı ve İmalatı
Beyda Taşar, Arif Gülten, Oğuz Yakut
doi: 10.5505/pajes.2020.12268  Page 0

2.40Ar/39Ar geochronology, mineral- and whole-rock geochemistry of the (sub)volcanic units in the Yemişliçay Formation, south of Sinop (Central Pontides)
Kürşad Asan, Hüseyin Kurt
doi: 10.5505/pajes.2019.93798  Page 0

3.A data envelopment analysis model for the efficiency measurement of facilities providing oral and dental health services
Dilek Esenlik Telatar, Kazim Sari
doi: 10.5505/pajes.2019.26618  Page 0

4.A decision support system for nurse scheduling problem
Ebru Geçici, Mehmet Güray Güler
doi: 10.5505/pajes.2019.86402  Page 0

5.A new model based on vortex search algorithm for estimating energy demand of Turkey
Ahmet Özkış
doi: 10.5505/pajes.2020.74943  Page 0

6.A New Reconstructable Distributed Connected Dominating Set Algorithm for Extending the Lifetime of Wireless Sensor Networks Including Energy Harvester Nodes
Elif Haytaoğlu, Ömer Güleç, Mustafa Tosun
doi: 10.5505/pajes.2020.83030  Page 0

7.A Novel Julia Based System Description Language and Simulation Environment: JuSDL
Zekeriya Sarı, Serkan Günel
doi: 10.5505/pajes.2020.03591  Page 0

8.A review on the usability of graphene/graphene oxide based sorbents in solid phase extraction technique
Rukiye Saygılı Canlıdinç
doi: 10.5505/pajes.2020.27475  Page 0

9.A Sample Scheme of Cordon-Based Congestion Charge: Erzurum, Cumhuriyet Street
Muhammed Yasin Çodur, Harun Coşkun
doi: 10.5505/pajes.2019.21284  Page 0

10.A Survey of Automatic Modulation Classification Algorithms for Cognitive Radio Applications
Hüseyin Cukur, Ahmet Serbes
doi: 10.5505/pajes.2018.89896  Page 0

11.An application of a fuzzy classification routine suggested for fine grained soils
Derya Toksöz, Işık Yılmaz
doi: 10.5505/pajes.2019.88278  Page 0

12.An experimental investigation on mode-I fracture toughness of mussel shell/epoxy particle reinforced composites
Cemal Koçhan
doi: 10.5505/pajes.2019.46690  Page 0

13.An experimental study on the stabilization of a clay soil with construction wastes and lime
Mamadou Lamine Diallo, Yeşim Sema Ünsever
doi: 10.5505/pajes.2019.51436  Page 0

14.Anaerobic co-digestion of tannery solid waste: optimum leather fleshings waste loading
Alper Bayrakdar
doi: 10.5505/pajes.2020.22465  Page 0

15.Anaerobic Lignocellulolytic Microbial Community Derived from Hindgut of Pachnoda Marginata Larva
Emine Gözde Özbayram, Orhan İnce, Sabine Kleinsteuber, Marcell Nikolausz
doi: 10.5505/pajes.2019.50980  Page 0

16.Analytical Design of PI Controllers for Third Order Plus Time Delay Systems
Bilal Şenol
doi: 10.5505/pajes.2019.19616  Page 0

17.Analyzing football betting behavior using prospect theory
Ozgur Yanmaz, Cigdem Kadaifci
doi: 10.5505/pajes.2020.71473  Page 0

18.Arsenate Removal from Groundwater by Air-injected EC with Al Ball Anodes: Effects of operational parameters
Ayşegül Yağmur Gören, Mehmet Salim Öncel, Mehmet Kobya
doi: 10.5505/pajes.2019.74152  Page 0

19.Bees algorithm for cubic cell formation problem
Hakan Gökdaş, Feristah Ozcelik
doi: 10.5505/pajes.2019.85125  Page 0

20.Behaviour of the waste steel fibre reinforced alkali-activated slag mortars exposed to high temperatures
Serhat Çelıkten, Mehmet Canbaz
doi: 10.5505/pajes.2019.66199  Page 0

21.Bioethanol production by syngas fermentation from pyrolysis gas using mixed culture: Heat-pretreatment effect
Tugba Keskin, Gozde Duman
doi: 10.5505/pajes.2019.52284  Page 0

22.Biogas potential of the black sea region from kitchen waste
Halil Şenol
doi: 10.5505/pajes.2019.45389  Page 0

23.Calcium Carbonate Precipitation by Urease and Carbonic Anhydrase Positive Bacteria
Naime Nur Bozbeyoglu, Tuğba Şensoy Candoğan, sevki arslan, BUKET KABALAY, Omer Bozkaya, Erdal Akyol, Nazime MERCAN DOĞAN
doi: 10.5505/pajes.2019.73848  Page 0

24.Chlorination roasting process for extraction of valuable metals in boron clays
Bengü Ertan
doi: 10.5505/pajes.2019.90836  Page 0

25.Comparison of hydrological models in upper Aras Basin
Ali Arda Sorman, Emin Tas, Yusuf Ogulcan Dogan
doi: 10.5505/pajes.2019.98852  Page 0

26.Compression of hyperspectral images using automatic adaptive luminance transform and 3D-DCT method
Ergün Can, Ali Can Karaca, Oğuzhan Urhan, Mehmet Kemal Güllü
doi: 10.5505/pajes.2019.85126  Page 0

27.Computational Modeling of Object-Directed Action Prediction Development
Serkan Buğur, Emre Ugur
doi: 10.5505/pajes.2020.09334  Page 0

28.Control of railway vehicle vibrations due to the effect of different superstructure stiffness in transition zones with rail irregularities
Arif Ulu, Muzaffer Metin
doi: 10.5505/pajes.2020.95770  Page 0

29.Design and Implementation of Web Based Risk Management System Based on Artificial Neural Networks for Software Projects: WEBRISKIT
M. Hanefi CALP, M. Ali AKCAYOL
doi: 10.5505/pajes.2019.29964  Page 0

30.Design of Adaptive Extended Kalman Filter-Based Speed-Sensorless Direct Torque Controlled Drive System with Constant Switching Frequency
Remzi Inan, Emrah Zerdali
doi: 10.5505/pajes.2019.68553  Page 0

31.Determination and economic analysis of the optimum insulation thickness of building walls, considering annual CO2 emission
Arzu Şencan Şahin, Tuğba Kovacı, Erkan Dikmen
doi: 10.5505/pajes.2020.03083  Page 0

32.Determination of Anisotropy of Reinforced Concretes by using Resistivity Method
Nevbahar Sabbağ, Osman Uyanık
doi: 10.5505/pajes.2019.00008  Page 0

33.Determination of groundwater vulnerability in karstic environments by using SINTACS method: Altınova aquifer case study
Ayşenur Amil, Ahmet Çil, Pınar Avcı, Ayşe Muhammetoğlu, Naciye Nur Özyurt
doi: 10.5505/pajes.2019.14265  Page 0

34.Determination of optimal method for management of leachate membrane concentrate by analytical hierarchy process
Nevim GENÇ, ELIF DURNA
doi: 10.5505/pajes.2019.42800  Page 0

35.Determination of the Hot Dry Rock from Radiogenic Heat Production for Potential Geothermal Sources and Example of Isparta-Yakaören
NURTEN AYTEN UYANIK, Büşra Kurt, Osman Uyanık
doi: 10.5505/pajes.2019.03502  Page 0

36.Different metal-containing hydrotalcite-like materials for carbon dioxide removal and applications of deactivation model
Dilşad Dolunay Eslek Koyuncu, Sena Yasyerli, Nail Yasyerli
doi: 10.5505/pajes.2019.33858  Page 0

37.Drying characteristics of Turkish ravioli, mantı
Hande Özge Güler, Murat Kumral, Ali KUŞ, Ayşenur Kanat, Oguz Gursoy, Yusuf YILMAZ
doi: 10.5505/pajes.2019.86234  Page 0

38.Dynamic coefficient-based cluster head election in wireless sensor networks
İpek Abasıkeleş Turgut
doi: 10.5505/pajes.2020.06691  Page 0

39.Effect of Filler Percentage of Recycled Asphalt Pavement (RAP) Materials on CBR Performance and Cost Analysis
Ayşegül Güneş Seferoğlu, Mehmet Tevfik Seferoglu, Muhammet Vefa Akpınar, Muhammet Çelik
doi: 10.5505/pajes.2019.48154  Page 0

40.Effect of Lead Rubber Bearing on Seismic Response of Regular and Irregular Frames in Elevation
Ahmet Hilmi Deringöl, Esra Mete Güneyisi
doi: 10.5505/pajes.2019.49207  Page 0

41.Effect of passive series damping resistor on single phase grid connected inverter with LCL filter
Akif Karafil
doi: 10.5505/pajes.2020.99896  Page 0

42.Effect of utilization of mineral admixture on the fresh and hardened properties of air-entrained cement mortars
Ece Geven, Süleyman Özen, Ali Mardani-Aghabaglou
doi: 10.5505/pajes.2020.85353  Page 0

43.Effectiveness of dynamic pricing strategy in presence of supply chain disruptions
Mualla Gonca Avci
doi: 10.5505/pajes.2020.54077  Page 0

44.Effects of Crumb Rubber Size and Concentration on Marshall Parameters of Rubberized Asphalt Mixture
Ali Almusawi, Hassan Shuaibu Abdulrahman, Mohammad Razeq Shakhan, Bora Doğaroğlu
doi: 10.5505/pajes.2020.50318  Page 0

45.Elastic Modulus Prediction for Fiber-Reinforced Concretes
Eren Yağmur
doi: 10.5505/pajes.2019.34017  Page 0

46.Electricity production by wet type top-pressure recovery turbine in blast furnaces
İlker Mert, Cuma Karakuş, Ali Gençoğlu
doi: 10.5505/pajes.2019.17702  Page 0

47.Energy Applications and Studies for Healthcare Facilities- A Systematic Review
Serap Ulusam Seçkiner, Ali Koç
doi: 10.5505/pajes.2019.36845  Page 0

48.Estimation of uniaxial compressive strength of very low-medium abrasive rocks from Cerchar abrasiveness index
Ahmet Teymen
doi: 10.5505/pajes.2019.36604  Page 0

49.Evaluation of Physico-chemical, Microbiological and Sensory Properties with Aroma Profile of Analogue Cheeses Produced from Plant and Dairy Based Protein Sources
Büşra Nur Esen, Onur Güneşer, Sinem Akyüz
doi: 10.5505/pajes.2019.99825  Page 0

50.Evaluation of the environmental risks of the waste casting sand used in cement mortar and its effects on the mechanical properties of the mortar
Derya Azak, Derya Över Kaman, Serdar Göncü
doi: 10.5505/pajes.2019.12571  Page 0

51.Experimental and theoretical investigation of drying kinetics of banana slices
Burak Türkan, Akın Burak Etemoğlu
doi: 10.5505/pajes.2019.84484  Page 0

52.Experimental investigation of turbulent flow upstream of the broad-crested weir
Elif Deniz Atlas, Mehmet Anil Kizilaslan, Ender Demirel
doi: 10.5505/pajes.2019.09225  Page 0

53.Failure analysis of bolted laminated composite plates
Tolga Dursun, Mahmut Özbay
doi: 10.5505/pajes.2020.99075  Page 0

54.Growth and aflatoxin production of Aspergillus flavus in fig-based medium: Effect of minerals and chelating agents
Sule Gunaydin, HAKAN KARACA
doi: 10.5505/pajes.2019.19476  Page 0

55.Impact of gravity frames on collapse performance of special steel moment frames
Onur Şeker
doi: 10.5505/pajes.2019.34032  Page 0

56.Inverse solution of the SP anomalies of two dimensional sheet like bodies
Coşkun SARI, Emre TİMUR
doi: 10.5505/pajes.2019.44069  Page 0

57.Investigation into the effect of the functionally graded and sandwich PVC foam filling on the energy absorption capability of 6063-T5 Al tubes
Muhammet Muaz Yalçın, Kenan Genel
doi: 10.5505/pajes.2019.92300  Page 0

58.Investigation of parameters affecting the formation of the bushing and bushing wall obtained in the friction drilling process
Cebeli Özek, Muhammet Bal
doi: 10.5505/pajes.2019.65148  Page 0

59.Investigation of positioning of the leakages in underwater natural gas pipelines in time and frequency selective acoustic channel
yigit mahmutoglu, Kadir Türk
doi: 10.5505/pajes.2019.25307  Page 0

60.Investigation of the effect of outdoor temperature data on the building heating energy requirement and validity of the TS 825 degree-day region clustering
Murat Altun, Aslı Akçamete, Çağla Meral Akgül
doi: 10.5505/pajes.2019.00334  Page 0

61.Investigation of the factors contributing to truck driver’s involvement in an injury accident
Ibrahim Khalil Umar, Samir Bashir
doi: 10.5505/pajes.2019.65391  Page 0

62.Investigation Of The Usability Of Building Concrete Wastes As Aggregate In Bituminous Base Course On Highways
Serdal Terzi, Mahmut VURAL
doi: 10.5505/pajes.2019.57983  Page 0

63.Invetigations of mechanical properties after dissimilar steels post-weld of Q345B steel
Bünyamin Çiçek, Tuna Aydoğmuş, Emine Gündoğdu İş, Yavuz Sun
doi: 10.5505/pajes.2020.66281  Page 0

64.Measurement of service quality in public transportation: definition of performance measurement system in service quality
Gökhan Üvenç, Sinem Kulluk
doi: 10.5505/pajes.2020.75032  Page 0

65.Model-free Automatic Segmentation of the Aortic Valve in Multislice Computed Tomography Images
Devrim Ünay, ibrahim harmankaya, ilkay oksuz, rahmi cubuk, Levent Çelik, Kamuran Kadipasaoglu
doi: 10.5505/pajes.2020.26817  Page 0

66.Modeling irrigation with nitrate contaminated groundwater
Güray Hatipoğlu, Zöhre Kurt
doi: 10.5505/pajes.2019.38963  Page 0

67.Natural organic matter removal from drinking water by enhanced coagulation process
Seda Tözüm Akgül, Sehnaz Sule Kaplan Bekaroglu, Nevzat Ozgu Yigit
doi: 10.5505/pajes.2019.48265  Page 0

68.New modeling of reconfigurable microstrip antenna using hybrid structure of simulation driven and knowledge based artificial neural networks
Ashrf Aoad, Zafer Aydin
doi: 10.5505/pajes.2020.67809  Page 0

69.Numerical analysis of fin effect in heat exchangers used in split air conditioners
Berkay Balkanlı, Ali Yurddaş, Yiğit Aksoy
doi: 10.5505/pajes.2019.64928  Page 0

70.Numerical investigation of the effects of design parameters on hydraulic turbine guide vane design
Kutay Çelebioğlu, Fatma Zeynep Aytaç Yılmaz
doi: 10.5505/pajes.2019.70850  Page 0

71.On the investigation of providing space truss roofs with ductility until failure under monotonically increasing vertical loads
Cüneyt Vatansever, Haluk Emre Alçiçek
doi: 10.5505/pajes.2019.92155  Page 0

72.Optimization of Linear Seismic Isolation Parameters via Crow Search Algorithm
Ali Erdem Çerçevik, Özgür Avşar
doi: 10.5505/pajes.2019.93636  Page 0

73.Optimization of parameters effecting food drying using Taguchi method
Burak Türkan, Akın Burak Etemoğlu
doi: 10.5505/pajes.2019.93695  Page 0

74.Overview of Process Mining: Alpha Algorithm for Process Flow Discovery
Onur Doğan
doi: 10.5505/pajes.2020.57418  Page 0

75.Poly(Lactic Acid) Nano Structure Mats as Potential Wound Dressings
Farnaz Sadat Fattahi, Akbar Khoddami, Osman Ozan Avinc
doi: 10.5505/pajes.2020.42890  Page 0

76.Preparation of GIS-based medium-scale settlement suitability plans by using Analytical Hierarchy Process (AHP): Sivas city province case study
Şeyma CEYLAN, ISIK YILMAZ
doi: 10.5505/pajes.2019.98975  Page 0

77.Production of Essential Oil-Based Composite Nanofibers by Emulsion Electrospinning
Funda Cengiz Çallıoğlu, Hulya KESICI GULER
doi: 10.5505/pajes.2019.67424  Page 0

78.Production of the low viscosity waste cooking oil ethyl ester
Mert Gülüm, Atilla Bilgin, Abdülvahap ÇAKMAK
doi: 10.5505/pajes.2019.48085  Page 0

79.Remediation of Cr(VI) using C3N4/DEU-51(Fe) under sun light irradiation
Sevil Akçağlar
doi: 10.5505/pajes.2019.38468  Page 0

80.Removal of color, COD, and turbidity from the effluents of turkey processing plant by ozonation: Box-Behnken approach and Monte Carlo simulation
Musa Buyukada
doi: 10.5505/pajes.2019.41961  Page 0

81.Removal of taste and odor from drinking water: performance evaluation and upgrade options for the treatment plants in Istanbul
Malhun Fakıoğlu, Mahmut Ekrem Karpuzcu, İsmail Toröz, Fatih Yıldız, İzzet Öztürk
doi: 10.5505/pajes.2019.78949  Page 0

82.Review of research on designing methods and properties of roller compacted concrete mixtures
Ali Mardani-Aghabaglou, Sultan Husein Bayqra, Süleyman Özen, Muhammet Gökhan Altun, Zia Ahmad Faqiri, Kambiz Ramyar
doi: 10.5505/pajes.2019.93530  Page 0

83.Scheduling of part time personnel in a university library with AHP and goal programming
Aliye Ayca Supciller, PINAR ERBİLEK
doi: 10.5505/pajes.2020.86383  Page 0

84.Seasonal temperature dynamics of Lake Erçek water column, Eastern Anatolia/Turkey
Ayşegül Feray Meydan, Suna Akkol
doi: 10.5505/pajes.2019.64436  Page 0

85.Selection of CRM software in hospitality industry by integrated DEMATEL and TODIM method
Zeynep Ünal, Emre Ipekci Cetin
doi: 10.5505/pajes.2020.08455  Page 0

86.Selection of Solar Energy Supply Facility Location with Robust Optimization and an Application
Turgut Karabulut, Selahattin Yavuz
doi: 10.5505/pajes.2019.27243  Page 0

87.Simulation of maximum power point tracking with buck-boost convertor for thermoelectric generators
Hayati Mamur, Yusuf Çoban
doi: 10.5505/pajes.2019.92488  Page 0

88.Staggered working hours in order to reduce traffic congestion
Özcan Mutlu, Zehra Durak, Hasan Akyer
doi: 10.5505/pajes.2019.90922  Page 0

89.Structural modeling and analysis of enterprise resource planning implementation barriers
Menekşe Yeşim Çakırlı, Saliha Karadayıusta, Şeyda Serdarasan
doi: 10.5505/pajes.2019.62993  Page 0

90.Structural, Electrical and Magnetic Properties of Au Doped Bi-2212 Superconductors
Esen Gün, BERDAN ÖZKURT, Mehmet Ersin AYTEKİN, Kasim Ocakoglu
doi: 10.5505/pajes.2020.54775  Page 0

91.System Dynamics Modelling of Bread Waste Problem
Elvan Gokalp
doi: 10.5505/pajes.2019.20726  Page 0

92.The determination of optimal cluster number by Silhouette index at clustering of the European Union member countries and candidate Turkey by waste indicators
Tuğba Söküt Açar, Nilgün Ayman Öz
doi: 10.5505/pajes.2019.49932  Page 0

93.The effect of diesel fuel amount on emissions ın a diesel-biogas dual fuel engine
İlker Turgut Yılmaz, Mustafa Yavuz, Metin Gümüş
doi: 10.5505/pajes.2019.08522  Page 0

94.The Effect of Holding Time After Sr Addition on Microstructural and Mechanical Properties of A356 Alloy
Sezgin Yaşa, Ahmet Kabil, Yahya Bayrak, Mustafa Çiğdem
doi: 10.5505/pajes.2020.04557  Page 0

95.The Effect of SiO2 Addition on Physical Properties of Al2TiO5 Ceramics
Melih Özçatal, Mustafa Serhat Baspinar
doi: 10.5505/pajes.2019.54910  Page 0

96.The extraction of cesium from boron industrial wastes
Engin Barut, Rukiye Saygılı Canlıdinç, Ferda Özmal, Yunus Erdoğan
doi: 10.5505/pajes.2020.28480  Page 0

97.The Influence of Natural Fiber Reinforcement on the Mechanical Properties of Polyolefin-Based Hybrid Composites
Ayça Şahika Şahin, Sami Sayer
doi: 10.5505/pajes.2020.05152  Page 0

98.The Investigation of the Effects of Cutting Parameters on Surface Roughness and Chip Formation in Turning of AISI 1050 Steel
Bahattin Yılmaz, Abdulkadir Güllü
doi: 10.5505/pajes.2020.06702  Page 0

99.The most efficient supplier selection with mixed-integer two-stage data envelopment analysis model
Volkan Soner Özsoy, Mediha Örkcü, H. Hasan Örkcü
doi: 10.5505/pajes.2019.77527  Page 0

100.Three-Dimensional Visualization of Geomaterials using Böhme Abrasion Apparatus
Okan Önal
doi: 10.5505/pajes.2019.02679  Page 0

101.Transportation of Flavorings and Bioactive Substances in Food Systems with Edible Films and Coatings and Their Effects on Functionality
Özgül Özdestan, Bahar Demircan
doi: 10.5505/pajes.2019.35714  Page 0

102.Ultrasound applications in the refining of crude oil
Özgür Devrim Ablay, Onur Ozdikicierler, Aytaç SAYGIN GÜMÜŞKESEN
doi: 10.5505/pajes.2019.76094  Page 0

103.Use of a Different Method in Determining the Equivalent Dose by Luminescence Techniques of a Ceramic Sample Containing Polymineral
Mehmet Altay Atlıhan
doi: 10.5505/pajes.2019.75299  Page 0

104.Use of Barley and Wheat Kavurga Flours in Lokma Production and Determination of Some Characteristic Properties
ilyas çelik, Gözde Tümer
doi: 10.5505/pajes.2020.52721  Page 0

105.Use of Cocamide Diethanolamide Chemical in Bitumen Modification
Gizem Kaçaroğlu, Mehmet Saltan
doi: 10.5505/pajes.2019.01643  Page 0

106.Use of Vacuum Insulation Panels in Aircraft
Hakan Keskın, Cem Tahsin Yücer
doi: 10.5505/pajes.2019.14396  Page 0

107.Using the kernel density estimation method in wind turbine performance test
Ceyhun YILDIZ, Mustafa SEKKELI
doi: 10.5505/pajes.2019.19488  Page 0

108.Valorization of brewery waste
Pınar Atalay, Nuriye Altınay Perendeci, Mehmet Yekta Goksungur
doi: 10.5505/pajes.2019.80850  Page 0

109.Video Forgery Detection Method based on Local Difference Binary
Guzin Ulutas, Beste Ustubioglu, Mustafa Ulutas, Vasif Nabiyev
doi: 10.5505/pajes.2020.75768  Page 0

110.XORSHIFTUL+: A Novel Hybrid Random Number Generator for Internet Of Things And Wireless Sensor Network Applications
Ömer Aydın, Cem Kösemen
doi: 10.5505/pajes.2020.00344  Page 0

111.Yielding of functionally graded curved beam subjected to temperature
Mehmet Haskul
doi: 10.5505/pajes.2019.92331  Page 0

 
Creative Commons License
This journal is licensed under a Creative Commons Attribution 4.0 International License


LookUs & Online Makale