E-ISSN: 2587-0351 | ISSN: 1300-2694

Attention: These articles have been accepted for publication; however, this list does not indicate the order in which articles will be published. As new articles are accepted, the order displayed here will change.

Ahead of Print - Pamukkale University Journal of Engineering Sciences

Ahead of Print

1.A comparative study of the effect of polyurethane nanofiber and powders filler on the mechanical properties of carbon fiber and glass fiber composites
Mustafa Özgür Öteyaka, Kerem Aybar, Hasan Candan Oteyaka
doi: 10.5505/pajes.2021.73659  Page 0

2.A comprehensive review on data preprocessing techniques in data analysis
Volkan Çetin, Oktay YILDIZ
doi: 10.5505/pajes.2021.62687  Page 0

3.A mini-review on different synthesis reactions of dioctyl terephthalate (DOTP) and properties of DOTP plasticized PVC
Aycan ALTUN, Mehmet Ferdi FELLAH
doi: 10.5505/pajes.2021.48840  Page 0

4.A novel Circular Intuitionistic Fuzzy AHP&VIKOR methodology: An application to a multi-expert supplier evaluation problem
İrem Otay, Cengiz Kahraman
doi: 10.5505/pajes.2021.90023  Page 0

5.A novel meta-optimizer for evolutionary algorithms: bipolar mating tendency
Mashar Cenk Gençal, Mustafa Oral
doi: 10.5505/pajes.2021.29165  Page 0

6.A Spare Parts Inventory Optimization Study in Mining
Sena Şenses, Onur Gölbaşı, İsmail Serdar Bakal
doi: 10.5505/pajes.2021.46243  Page 0

7.An AHP based mathematical model to determine the criteria used in the worker performance evaluation
Büşra Tutumlu, Tugba Saraç, Mujgan Sagir
doi: 10.5505/pajes.2021.46020  Page 0

8.An Alternative Approach to Obtaining The Direct Tensile Strength of The Rocks From The Indirect Tensile Strength
Kenan Tüfekci, Servet Demirdag, NAZMI SENGUN, Tamer Efe, Rasit Altindag
doi: 10.5505/pajes.2021.98479  Page 0

9.An ensemble approach for aspect term extraction in Turkish texts
Mehmet Umut Salur, İlhan Aydın, Maen Jamous
doi: 10.5505/pajes.2021.25902  Page 0

10.Analysis of Supply Chain Risks by Structural Equation Model and Fuzzy Analytical Hierarchy Process
Murat Oturakçı, Rabia Sultan Yıldırım
doi: 10.5505/pajes.2021.34119  Page 0

11.Availability of Topex V28.1 Gravity Data across the Continent Excluding Seas. A case study, Western Anatolia Example
Tolga Gönenç
doi: 10.5505/pajes.2020.32654  Page 0

12.Benefit Cost Analysis for Leakage Management and Network Rehabilitation in Distribution Systems
Fatih Mehmet Durmuşçelebi, Mahmut Fırat, Özgür ÖZDEMİR
doi: 10.5505/pajes.2020.29726  Page 0

13.Breast Cancer Diagnosis using Deep Belief Networks on ROI Images
Gökhan Altan
doi: 10.5505/pajes.2021.38668  Page 0

14.Case Study for Comparative Analysis of a BIM-based LEED Building and Non-LEED Building
Senem Seyis
doi: 10.5505/pajes.2021.85668  Page 0

15.Classification Of Skin Lesions Using Convolutional Neural Networks
Onur Bilginer, Burcu Tunga, Rustu Murat Demirer
doi: 10.5505/pajes.2021.68700  Page 0

16.Comparing time to collision and time headway as safety criteria
Ehsan Ramezani Khansari, Fereidoon Moghadas Nejad, Sina Moogehi
doi: 10.5505/pajes.2020.79837  Page 0

17.Comparison of one and three dimensional site response analyses
Mehmet Ömer Timurağaoğlu, Yasin Fahjan, Adem Dogangun
doi: 10.5505/pajes.2021.40565  Page 0

18.Computational Assessment of External Force Acting on Beam Elastic Foundation
Abdgafar Tunde Tiamiyu, Falade Iyanda KAZEEM, Abdullahi Shuaibu Abubakar
doi: 10.5505/pajes.2021.52383  Page 0

19.Crowd-shipping service network design problem
Barış Yıldılz
doi: 10.5505/pajes.2021.83809  Page 0

20.Design and implementation of a Quasi-Z-Source inverter
Mustafa Sacid Endiz, Ramazan Akkaya
doi: 10.5505/pajes.2021.04976  Page 0

21.Design and manufacture of a sensor control the glasses of vehicles to protect forgotten life-beings inside vehicles
erkan öztürk, Semih KAYGUSUZ, Fatih Sağlam, Kemal YILDIZLI
doi: 10.5505/pajes.2021.43568  Page 0

22.Determination of Optimal Cross-Section Values of Precast Roof Beams Under Changing Design Bending Moments and in Terms of Different Concrete Strengths
Mehmet Kevser Derdiman
doi: 10.5505/pajes.2021.25477  Page 0

23.Determination of Optimum Flotation Conditions in Niğde (Ulukışla) Complex Pb-Zn Ore
Tevfik Ağaçayak, Nur Benan Yılmaz
doi: 10.5505/pajes.2020.74794  Page 0

24.Development of Autonomous Photovoltaic Panel Surface Cleaning Robot and Analyzing of Cleaning Interval on Energy Efficiency
Bilal Karaman, SEZAI TASKIN
doi: 10.5505/pajes.2021.45014  Page 0

25.Development of PVC membrane potentiometric sensor for the determination of potassium ion and its applications
Ömer Işıldak, Oğuz Özbek, Meliha Burcu Gürdere, Alper Çetin
doi: 10.5505/pajes.2020.27982  Page 0

26.Development of tissue scaffolds with nanoparticles for bone tissue engineering applications
Zeynep Püren Akgüner, Ayça Bal Öztürk
doi: 10.5505/pajes.2020.63933  Page 0

27.Different Approach for the Determination of Dynamic Modulus of Asphalt Mixtures in Turkey.
Saadoon Obaid Eyada, Osman Nuri ÇELİK, Mohammed Ihsan Aldakuky
doi: 10.5505/pajes.2021.38085  Page 0

28.Direct pose estimation from RGB images using 3D objects
Muhammet Ali Dede, Yakup Genç
doi: 10.5505/pajes.2021.08566  Page 0

29.Effect of Tarragon Addition on Volatile Compound Profile and Some Quality Paramaters of Sucuk
Aybike Kamiloğlu, Tugba Elbir, Kübra Çinar Topçu
doi: 10.5505/pajes.2021.37236  Page 0

30.Effects of Enzyme-Resistant Starch Obtained from Rice Starch by Autoclaving-Retrogradation Method on the Rheology of Bread Dough and Some Chemical Properties of Bread
Ayşe Demirekin, Hülya Gül
doi: 10.5505/pajes.2020.25738  Page 0

31.Effects of Pounding on Displacement Demands in Mid-Rise RC Buildings
Muhammet Kamal, Mehmet İnel
doi: 10.5505/pajes.2021.58897  Page 0

32.Estimation of shear strength parameters of a high plasticity clayey soil stabilized with lime at different curing temperatures using Response Surface Methodology (RSM)
Hakan Alper Kamiloğlu, Hüseyin Turan
doi: 10.5505/pajes.2021.83707  Page 0

33.Evaluating the performances of rapid assessment methods by using damaged buildings in earthquake
Nurbanu DEMİRBAŞ, Hümeyra ŞAHİN, Cengizhan DURUCAN
doi: 10.5505/pajes.2021.84115  Page 0

34.Evaluating the shape and the mid-cross-aisle location in a multi-dock unit-load warehouse design
Mahmut Tutam
doi: 10.5505/pajes.2021.49779  Page 0

35.Evaluation of structural lightweight concrete in terms of energy performance: A case study
SAFA NAYIR, Ümit Bahadır, Şakir Erdoğdu, Vedat Toğan
doi: 10.5505/pajes.2021.27628  Page 0

36.Evaluation of Sub-Network Search Programs in Epilepsy-Related GWAS Dataset
Beyhan Adanur Dedeturk, Burcu Bakir Gungor
doi: 10.5505/pajes.2021.56424  Page 0

37.Experimental investigation of performance of obstruction flow-meters designed with theoretical methods and Computational Fluid Dynamics
Hasan Küçük, Murat Ünverdi
doi: 10.5505/pajes.2021.22844  Page 0

38.Extraction and characterization of pectin from waste of fruit peels
Emine Şen, Semanur Özdemir, Erdal Uğuzdoğan
doi: 10.5505/pajes.2021.91033  Page 0

39.Fatty Acid Composition and Conjugated Linoleic Acid Content of Cheeses Produced with Goat Milk
Oğuz Gürsoy, Rabia Fakı, Kübra Kocatürk, Gamze Esgin, Yusuf Yılmaz
doi: 10.5505/pajes.2021.05995  Page 0

40.Geostatistical Analysis and Spatial Distribution Map of Geochemical Contents of the Susuzdag Formation Limestones
Ozge Ozer Atakoglu, Mustafa Gurhan Yalcin
doi: 10.5505/pajes.2021.82609  Page 0

41.Investigating the thermal resistance of B. coagulans in the thyme oleoresin added tomato soup
Ahsen RAYMAN ERGÜN, Taner BAYSAL, Dilber ÇAĞLAR, Hilal TÜFENK, Bekir BATMAZ
doi: 10.5505/pajes.2020.47717  Page 0

42.Investigation of heat transfer in combustion chamber of a direct injection diesel engine under different compression ratios and engine torques
Ali Şanlı, Metin Gumus
doi: 10.5505/pajes.2021.20599  Page 0

43.Investigation of over-exploited groundwater in Çumra Plain (Konya-Turkey) with environmental isotopes
Ayla Bozdağ
doi: 10.5505/pajes.2021.42272  Page 0

44.Investigation of quasi-static crushing and energy absorption behaviors of carbon nanotube reinforced glass fiber/epoksy and carbon fiber / epoxy composite tubular structures
Yasin Yilmaz, Hasan Çallıoğlu, Ali Balbay
doi: 10.5505/pajes.2021.68047  Page 0

45.Investigation of Relative Tectonic Activity of the Salanda Fault Zone Between Kesikköprü (Kırşehir) and Yeşilöz (Nevşehir) by Geomorphic Indices
Ramazan Demircioğlu, Berkant Coşkuner
doi: 10.5505/pajes.2021.65848  Page 0

46.Investigation of Temperature Effect on Dynamic Characteristic of Polymer Hybrid Bearings in Elastic Area
Burcu Küçükoğlu Doğan, Tuncay Karaçay
doi: 10.5505/pajes.2021.58708  Page 0

47.Investigation of the effect of structural parameters of elastic beam array in contact with smooth and rigid body on friction force
Turgay Eray
doi: 10.5505/pajes.2021.35478  Page 0

48.Investigation of The Friction and Wear Properties of Nitrided 7075-T6 Aluminum Alloy Under Vacuum and Ambient Air
Hojjat Ghahramanzadeh Asl, Yaşar Sert, Özgü Bayrak, Tevfik Küçükömeroğlu
doi: 10.5505/pajes.2021.83903  Page 0

49.Investigation of the revision requirement of an existing electrical installation integrated with electric vehicle charging station in Simaris software
Engin Çetin
doi: 10.5505/pajes.2021.85550  Page 0

50.Investigation of the rheological properties of bitumen modified with different waste oils under various frequencies and temperatures
Erkut Yalçın, Mehmet Yılmaz
doi: 10.5505/pajes.2021.46038  Page 0

51.Investigation of Usability İn Road Construction of Basalt Aggregate Provided from Different Regions
Mehmet Saltan, Alev Akıllı El
doi: 10.5505/pajes.2021.26529  Page 0

52.Life Cycle Assessment Analysis of Plastic Coupling
Sevde ÜSTÜN ODABASI, Hanife Büyükgüngör
doi: 10.5505/pajes.2021.05769  Page 0

53.Long Term Filtration Performance of Recycled Asphalt Pavement Material
Ayşegül Bayın Sarıahmetoğlu, Recep İyisan, Aslı Yalçın Dayıoglu, Mustafa Hatipoğlu
doi: 10.5505/pajes.2021.05760  Page 0

54.Multi-Level Security Model in Distributed Database Systems
Çiğdem Bakır, Mehmet Güçlü
doi: 10.5505/pajes.2021.69947  Page 0

55.New branch location selection with AHP, ARAS and fuzzy TOPSIS: an example of a supplier company in the maritime industry
Abdülsamet Kara, Ahmet Masri, Gülsüm Kübra Kaya
doi: 10.5505/pajes.2021.40460  Page 0

56.Optimization of welding job-shop scheduling problem under variable workstation constraint: an industrial application with Arena simulation based genetic algorithm
Aslan Deniz Karaoglan
doi: 10.5505/pajes.2021.41948  Page 0

57.Organic material removal from bilge water by chemical treatment processes
Çiğdem Öz, Ender Cetin
doi: 10.5505/pajes.2021.50607  Page 0

58.Performances of Sequential Denitrification and Partial Nitrification Process for Treatment of Landfill Leachate
Ahmet DUYAR, Ahmet DUYAR, VİLDAN AKGUL, Gokhan Civelekoglu, Gokhan Civelekoglu, kevser Cırık
doi: 10.5505/pajes.2020.38093  Page 0

59.Petrography and geochemistry of Bahatlar volcanites (Emet-Kütahya)
Cafer Özkul, Recep Uğur Acar, Mehmet Demi&775;rbi&775;lek
doi: 10.5505/pajes.2021.32847  Page 0

60.Prediction of human protein functions with protein mapping techniques and deep learning model
Talha Burak Alakuş, İbrahim Türkoğlu
doi: 10.5505/pajes.2021.51261  Page 0

61.Preparation of [email protected]@Ag nanocomposites, production of nanofiber with PVP and its characterization
Aylin YILDIZ, Cumali Demir, Derman Vatansever Bayramol, AHMET ÖZGÜR AĞIRGAN
doi: 10.5505/pajes.2021.00225  Page 0

62.Production of instant tea with herbal extracts from St John’s wort (Hypericum perforatum) and geranium (Perlargonium graveolens)
Merve Sılanur Yılmaz, Kübra Köşker, Hicran Arslan, Fatoş Altunkara, Serap Eraslan, Özge Şakıyan
doi: 10.5505/pajes.2021.40403  Page 0

63.Production of nanofiber textile surfaces with β-arbutin via electrospinning method
Gamze D Tetik, Ejebay Jumageldiyeva, Ayşe Ebru Tayyar
doi: 10.5505/pajes.2021.98223  Page 0

64.Reference Material Development Process for Tensile Test Method
Alper İncesu, Betül Ercan, Engin Cevik, Yasin Akgul
doi: 10.5505/pajes.2021.01613  Page 0

65.Regulating Watermarking Semi-Authentication of Multimedia Audio via Counting-Based Secret Sharing
Adnan Gutub
doi: 10.5505/pajes.2021.54837  Page 0

66.Shuttle bus service routing: A systematic literature review
Gaye Peker, Deniz Türsel Eliiyi
doi: 10.5505/pajes.2021.26243  Page 0

67.Stress detection on smartphone data with a machine learning approach based on Mahalanobis distance-based outlier finding and ReliefF feature selection
Ensar Arif Sağbaş, Serdar Korukoglu, Serkan BALLI
doi: 10.5505/pajes.2021.88724  Page 0

68.The Determination of 3-D P and S-Wave Attenuation Structures in Marmara
Şakir Şahin
doi: 10.5505/pajes.2021.83547  Page 0

69.The effect of freeze dried fruit powders on some of the physicochemical properties of the layer cake
Kadriye Ergün Altay, Gulsah Caliskan Koc, Safiye Nur Dirim
doi: 10.5505/pajes.2020.83883  Page 0

70.The removal of Astrazon Black MBL with an innovative adsorbent: Optimization of operating parameters with Taguchi method
Elanur Adar
doi: 10.5505/pajes.2020.34734  Page 0

71.The Site Effect Assessment of September 26, 2019 Marmara Sea Earthquake (5.8 Mw) in the Vicinity of İstanbul
Hamdullah Livaoglu, Fadime Sertçelik
doi: 10.5505/pajes.2021.71509  Page 0

72.The Use of Carbon Obtained by Carbonization of Paper Mill Sludge Waste in the Adsorption of Cd(II) Ions from Aqueous Solutions
Çiğdem Er Çalışkan, Harun Ciftci
doi: 10.5505/pajes.2021.63822  Page 0

73.Torsion of Variable Stiffness Composite Laminated Beams
Muhsin Gökhan Günay
doi: 10.5505/pajes.2021.99404  Page 0

74.Vibration Analysis of a Pre-Stressed Curved Thin Plate
Can Gönenli, Hasan Ozturk, Oğuzhan Daş
doi: 10.5505/pajes.2021.76814  Page 0

75.Wrinkling Properties Of Bi-Stretch Denim Fabrics
Gülbin Fidan, Yasemin Korkmaz, Hatice Kübra Kaynak
doi: 10.5505/pajes.2020.74044  Page 0

76.X band microstrip ring patch antenna design and performance evaluation according to feeding types
Melih Hacımehmet
doi: 10.5505/pajes.2021.30632  Page 0

LookUs & Online Makale