E-ISSN: 2587-0351 | ISSN: 1300-2694

Attention: These articles have been accepted for publication; however, this list does not indicate the order in which articles will be published. As new articles are accepted, the order displayed here will change.

Ahead of Print - Pamukkale University Journal of Engineering Sciences

Ahead of Print

1. A guideline for karst spring discharge modeling: The example of Susuz karst aquifer conceptual model, Seydişehir, Turkey
Süleyman Selim Çallı, Mehmet Çelik
doi: 10.5505/pajes.2024.68822  Page 0

2. A new multi-ınput single-output voltage-mode universal biquadratic filter with grounded passive elements and orthogonally adjustable filter parameters
Elham Minayi
doi: 10.5505/pajes.2024.88935  Page 0

3. A novel correlation study using Pearson and Spearman algorithms for mineral component-driven strength analysis of geopolymer
Yıldıran Yılmaz, Talip Çakmak, Zafer Kurt, Ilker Ustabas
doi: 10.5505/pajes.2024.48682  Page 0

4. Adsorption of Telon Blue Dye from Aqueous Solutions Using Pine Cone Powder: Isotherm, Kinetic Models and Heat of Adsorption
Melike İşgören
doi: 10.5505/pajes.2024.17124  Page 0

5. Analysis of permaculture potential of agro-ecological regions with GIS and RS techniques: an Example of Ankara Stream Basin
Ceren Özcan Tatar, Bilge Bingül, Emrah Pekkan, Saye Nihan Cabuk
doi: 10.5505/pajes.2024.48566  Page 0

6. Comparison of reverse osmosis and nanofiltration membranes in water purification process
Ahmet Bora Yavuz, Osman Nuri Ata
doi: 10.5505/pajes.2024.33238  Page 0

7. Determination of Beacon Distance Values According to Ambient Conditions by Polynomial Interpolation and Artificial Neural Networks
Recep Çakır, Serkan Doganalp
doi: 10.5505/pajes.2024.48079  Page 0

8. Drought analysis and Southeast Anatolia Region example
İlteriş Taşkolu, MAHMUD Güngör
doi: 10.5505/pajes.2024.35079  Page 0

9. Evaluation of mechanical properties of woven blankets with recycled yarns
Ayse Ebru Tayyar, Hakan Macit, Ayşe Şevkan Macit, Gonca ALAN
doi: 10.5505/pajes.2024.01651  Page 0

10. Evaluation of some physiochemical and bioactive properties of the cone extract molasses in terms of food safety and quality
Emine İncemehmetoğlu, Müge Hendek Ertop
doi: 10.5505/pajes.2024.80005  Page 0

11. Extending shelf life and developing palatability of chicken meat by coating active edible film
Yahya Imar, Mustafa Kemal Uslu, Ahmet Oktay Küçüközet, Firuze Ergin Zeren
doi: 10.5505/pajes.2024.94562  Page 0

12. Hydrogeochemistry and hydrothermal alteration of the Hanle geothermal field, Djibouti-East Africa
Ali Ferat Bayram, Moussa Hassanleh Hassan
doi: 10.5505/pajes.2024.48979  Page 0

13. Investigating effects of Levenshtein distance algorithm on accuracy performance in EEG based communication system
Güneş Ekim, Nuri İkizler, Ayten Atasoy
doi: 10.5505/pajes.2024.66263  Page 0

14. Investigation of magnesia, zirconia additives and process parameters in Sol-Gel derived alumina ceramic by experiment design method
Emre Yalamaç, Hüseyin Adıgüzel, Memnune Murat, Dila Vural, Ali Cihan Çelik
doi: 10.5505/pajes.2024.17981  Page 0

15. Not All Fog Removers are Equal: Unmasking the Impact of Dehazing on Object Detection
Ahmet Selman Bozkır, Nurçiçek Özenç
doi: 10.5505/pajes.2024.05784  Page 0

16. Optimization of peach pulp residue hydrolysis by acid-assisted microwave
İlgi Karapınar, Müge Dalak, Wasiu Ayodele Abibu
doi: 10.5505/pajes.2024.35253  Page 0

17. Performance evaluation of IPARD-II rural development programs with integrated DIBR-RAWEC methods
Sinan Dündar
doi: 10.5505/pajes.2024.43996  Page 0

18. Source Investigation of Silicon in Miocene Aged Bituminous Claystones of Ilgın (NW of Konya) Area
Ali SARI, Kamal ISMAYILZADA, Elif AKISKA, Fuat EROL
doi: 10.5505/pajes.2024.44349  Page 0

19. Structural and non-structural measures to mitigate the impact of climate change on civil engineering structures: A review
Melih Şahinöz, Ömer Şahinöz
doi: 10.5505/pajes.2024.22127  Page 0

20. Analysis of the impacts of average speed enforcement on driving speed of university members in Turkey
Arzu Ilgaz, Mehmet Saltan
doi: 10.5505/pajes.2024.00194  Page 0

21. Assessment of education types for university education via multi-criteria decision-making methods
Mehmet Soydan, Yusuf Ilker Topcu
doi: 10.5505/pajes.2024.07572  Page 0

22. Brain-Computer Interfaces With Auditory Stimuli: A Review Study
Bahar Nazlı, Ahmet Reşit Kavsaoğlu
doi: 10.5505/pajes.2024.57958  Page 0

23. Comprehensive review of the effect of flap technologies in H-Darrieus vertical axis wind turbines
Himmet Erdi Tanürün
doi: 10.5505/pajes.2024.09147  Page 0

24. Development of open-source software for thermo-economic analysis and optimization of the Organic Rankine Cycle
Mehmet Berk AZDURAL, Ali KAHRAMAN, Sadık ATA
doi: 10.5505/pajes.2024.43883  Page 0

25. Effective fractional order PID control design of DC Motors using the walrus optimization algorithm
Hasan Başak, Kadri Doğan
doi: 10.5505/pajes.2024.18134  Page 0

26. Effects of alkaline treated and untreated halloysite on the properties of poly(butylene succinate)/halloysite composite films
Bedriye Üçpınar Durmaz
doi: 10.5505/pajes.2024.89457  Page 0

27. Experimental investigation of the effect of submerged multiple synthetic jets on heat transfer in cross-flow
Unal Akdag, Selma Akcay, Bekir Güngör, Hakan Palancioglu
doi: 10.5505/pajes.2024.23428  Page 0

28. Experimental verification of performance of single phase induction motor for different rotor slot shapes
Merve Şen Kurt, AHMET FENERCİOĞLU
doi: 10.5505/pajes.2024.95769  Page 0

29. Folate production in lactic acid bacteria and determination of folate derivatives by HPLC
Meryem Nur Zeydanli, Zehranur Yuksekdag, Berat Cinar Acar
doi: 10.5505/pajes.2024.12402  Page 0

30. Improving the Natural Ventilation in Classic Women's Shirts by Using Textile Manipulation Techniques
Sertaç Güney, Tülay Gümüşer
doi: 10.5505/pajes.2024.14303  Page 0

31. Investigation of Green Competiencies of Textile Enterprises in Turkiye
Senem Pak, ONCÜ YANMAZ ARPACI, Ferda Esin Gülel, Melda Gölemezli
doi: 10.5505/pajes.2024.57375  Page 0

32. Investigation of the effect of frequency on 316L powder production using ultrasonic atomization
İnayet Burcu Toprak
doi: 10.5505/pajes.2024.27917  Page 0

33. Investigation of the microstructure and tensile properties of dual-phase steels of different strength levels joined by resistance spot welding
Emre Katılmış, Muhammed Elitaş
doi: 10.5505/pajes.2024.24992  Page 0

34. Numerical and Experimental Investigation of Mechanical Strength of Heavy-Duty Vehicle Integrated Wheel Hub
İbrahim Can Güleryüz
doi: 10.5505/pajes.2024.92800  Page 0

35. Springback behavior of fiber metal laminate (FML) composites in press brake forming process
Ahmed Ozan Örnekci, Seçil Ekşi
doi: 10.5505/pajes.2024.43037  Page 0

36. Strength And Fatigue Properties Of Erdemir 1314 Quality Galvanized Steel Sheet Metal and Al 5052-H32 Alloy Sheet Metal Joints
Ahmet Çetkin, Yılmaz Baydemir
doi: 10.5505/pajes.2024.20805  Page 0

37. Use of banana peel powder and sorbitol in pudding production: D-optimal combined design approach
Şura Arslan, Beyza Nur Duru, Serap Berktaş, Mustafa Çam
doi: 10.5505/pajes.2024.67862  Page 0

38. Water tank design for helicopters performed to fight forest fires
Eyüp Can Altıntaş, Gizem Gül Kara, Mustafa Akbal, Abdussamet Akbaş, Burhan Şahin, Harun Çelik
doi: 10.5505/pajes.2024.36524  Page 0

39. A comparative study on the production and characterization of PVDF-based air filters by centrifugal spinning and solution blowing methods
Mehmet Durmuş Çalışır
doi: 10.5505/pajes.2025.37279  Page 0

40. Analysis of the special case of binary separation at source of municipal solid waste with the help of analytical hierarchy process in terms of environmental, economic, social and technical criteria.
Ömer Apaydın
doi: 10.5505/pajes.2025.05324  Page 0

41. Classification of different odors using fuzzy logic method and artificial neural network
Ümit Özsandıkcıoğlu, Bilal Talha Ayvaz, Ayten Atasoy
doi: 10.5505/pajes.2024.68623  Page 0

42. Design and performance analysis of a new medium access control protocol with quality of service support for effective and fair transmission of heterogeneous data traffics in Internet of Things applications
Sedat Atmaca
doi: 10.5505/pajes.2025.85710  Page 0

43. Design of true-bridgeless power factor correction converter and analysing dynamic response using predictive current control with pulse train strategy
Mehmet Fatih Özlük, Mustafa Gökdağ, Ozan Gülbudak
doi: 10.5505/pajes.2024.43027  Page 0

44. Detection of Colon Cancer Using K-means And Deep Learning Algorithms on Histopathological Images
Ulaş Yurtsever, Hayrettin Evirgen, Mustafa Cihat Avunduk
doi: 10.5505/pajes.2025.71508  Page 0

45. Effect of Tungsten-Cobalt (Wco) Nanoparticles on Shear and Flexural Strength of Adhesive Joints
Mikail Aslan, MEHMET VEYSEL ÇAKIR, AHMED ALMOSSA
doi: 10.5505/pajes.2025.94572  Page 0

46. Effects of high temperature and Etibor-48 mineral on the swelling pressure and soil-water characteristic curves of bentonite
Şükran Gizem Alpaydın, Yeliz Yukselen-Aksoy
doi: 10.5505/pajes.2025.04575  Page 0

47. Flow Stress And Fracture Strain Behavior Of Galvanized Low Carbon EREGLI 1312 Steel
Ahmet Çetkin
doi: 10.5505/pajes.2024.07023  Page 0

48. Investigation of factors influencing the transportation mode preferences of academic staff: Ege University Case
Mehmet Metin Mutlu, YALÇIN ALVER
doi: 10.5505/pajes.2025.88038  Page 0

49. Investigation of the effects of precision casting waste sands on the thermal shock resistance properties of fire clay refractory materials
Veysel Murat Bostancı, Tuba Bahtlı
doi: 10.5505/pajes.2024.82496  Page 0

50. Literature research on the effect of traffic infrastructure, environment and user behavior on urban bicycle use
Recep Aydar, Osman Nuri Çelik, Ali Afşar
doi: 10.5505/pajes.2024.09804  Page 0

51. Mass Reduction Through the Design of Satellite Primary Structural Components Suitable for Additive Manufacturing Technology Using Geometric Optimization
buket çam, buket çam, Olcay Ersel CANYURT, Olcay Ersel CANYURT
doi: 10.5505/pajes.2024.02845  Page 0

52. Measurement of important tribocorrosion properties of titanium implant and assessment with digital image processing
Emrah Irmak, Enis Körpe
doi: 10.5505/pajes.2025.55562  Page 0

53. Modeling a power transmission line located in the Turkey's electric transmission system by converting to bipolar HVDC system and fault analysis
Ekrem Şahin, Hasbi ismailoglu
doi: 10.5505/pajes.2025.68188  Page 0

54. Performance Comparison of Heart Disease Detection with Machine Learning Algorithms
Bekir Can Telkenaroğlu, Bahar Demirtürk, Bayram Köse
doi: 10.5505/pajes.2025.34539  Page 0

55. Pyrolytic Oil Production System and ANN-Based Modeling
Emirhan YELEKİN, İbrahim MUTLU, Murat ALCIN, Murat TUNA, ismail KOYUNCU
doi: 10.5505/pajes.2025.87422  Page 0

56. Turbidity and Color Removal from River Water with Tree Xylem as a Natural Filter
Niyazi Erdem Delikanlı
doi: 10.5505/pajes.2025.02391  Page 0

57. Vibration analysis of beams with intermediate supports under moving loads
Emre Gemici, Yaşar Pala
doi: 10.5505/pajes.2025.82596  Page 0

58. A Deep-XAI Method for Histopathological Image Classification: Utilizing Transformer based FNet Architecture and LIME Method
Delal Şeker, Aslı Akhan, Abdulnasır Yıldız
doi: 10.5505/pajes.2025.98572  Page 0

59. An advanced KEMIRA-M method proposal based on FARE method to perform ergonomic risk evaluation in a dishwasher assembly line
Pelin Toktaş, Gülin Feryal Can
doi: 10.5505/pajes.2025.49931  Page 0

60. An Approach to Estimation of Durability Performance of A Driveshaft
Onur Şen, Enver Atik
doi: 10.5505/pajes.2025.39129  Page 0

61. Changes in microbial structure in the anammox population at high-temperature
Tugba Sari
doi: 10.5505/pajes.2025.69449  Page 0

62. Cogging Torque Reduction of Axial Flux Permanent Magnet Brushless DC Motors for Electric Vehicle Applications with Magnet Segmentation Technique
Amit Patel
doi: 10.5505/pajes.2025.67523  Page 0

63. DDoS_FL: Federated Learning Architecture Approach against DDoS Attack
Büşra Büyüktanır, Zeki Çıplak, Abdullah Emir Çil, Özlem Yakar, Mahamoud Brahim Adoum, Kazım Yıldız
doi: 10.5505/pajes.2025.40456  Page 0

64. Detecting the Borders of a Pool-like Environment by Using Scanning Sonar Data for AUVs
Hatice Hilal Ezercan Kayır, Metin Baydarakçı
doi: 10.5505/pajes.2025.86344  Page 0

65. Determination of flood inundation of Serinhisar district center of Denizli province with HEC-RAS software and geographic information systems
Abdul Latif Rustam Oghly, Mahmud Güngör
doi: 10.5505/pajes.2025.44914  Page 0

66. Drought Analysis of Batman and Diyarbakir Provinces in Turkey with Various Drought Indices
Fatih Özmen, Murat BATAN
doi: 10.5505/pajes.2025.50945  Page 0

67. Effect of glass fiber reinforcement on compressive flexibility and dimensional stability in injection-molded polypropylene composite locking ring
Muhammet Dağlı, Ahmet DEMIRER, Esra Yumat
doi: 10.5505/pajes.2025.22866  Page 0

68. Effects of washing with boric acid solutions and tap water on some quality characteristics of fresh-cut spinach
Evra Sarı, Bahar Demircan, Yakup Sedat Velioglu
doi: 10.5505/pajes.2025.25926  Page 0

69. Hydrothermal liquefaction for bio-fuel production from loquat seeds
Koray ALPER, BETUL ERCAN
doi: 10.5505/pajes.2025.93903  Page 0

70. Investigation of the effect of the use of waste toys as recycling material in glass-fiber reinforced composites on mechanical properties
Mehmet Bulut
doi: 10.5505/pajes.2025.66671  Page 0

71. IoT applications in occupational health and safety in the construction industry: Bibliometric, visual, and methods analyses
Şerife Ak
doi: 10.5505/pajes.2025.43678  Page 0

72. Kinetic studies of acetophenone derivative oximes and investigation of thermal decomposition mechanism
Züleyha Merve İlkileri, Emin Karapinar, Ramazan Donat, Nazan Karapinar
doi: 10.5505/pajes.2025.35514  Page 0

73. Numerical investigation of residual stress formation during swage autofrettage process
Doğan Baran, Osman Bican, Yahya Doğu
doi: 10.5505/pajes.2025.86727  Page 0

74. Production of nanofiber composite membrane from chitosan added polyamide-6/cellulose acetate (PA6/CA) and investigation of membrane permeability
Abdullah Gül, İsmail Tiyek
doi: 10.5505/pajes.2025.68338  Page 0

75. The origin and emplacement dynamics of the volcaniclastic and sedimentary clastic dykes in volcanic fields: A case study from the Erenlerdağ-Alacadağ Volcanic Complex (Konya-TURKEY)
Mesut Gündüz, Ali Müjdat Özkan, Kürşad Asan
doi: 10.5505/pajes.2025.57227  Page 0

76. A deep learning approach for assessing consumer sentiment in amazon dataset
Nazeeha Sayghn Khalid Khalid, Serkan Savaş
doi: 10.5505/pajes.2025.45753  Page 0

77. A novel solution approach for optimization of swarm UAV formation control problem under uncertain and dynamic constraints: Crazyfly 2.0 application
Ukbe Üsame Uçar, Burak Tanyeri
doi: 10.5505/pajes.2025.09552  Page 0

78. A stable and fast PSO algorithm guided by SPSA for vector quantization-based image compression
Ilker Kılıc, Haldun Sarnel
doi: 10.5505/pajes.2025.78006  Page 0

79. Changing the design of the day sight ocular body to reduce its weight and additive manufacturing with AlSi10Mg alloy
Cem Ertek, Ramazan Evrensel
doi: 10.5505/pajes.2025.76709  Page 0

80. Comparative Analysis of Afyonkarahisar Wind Energy Potential with TR33 Development Region Provinces and A Sample Feasibility
Fatih Serttaş
doi: 10.5505/pajes.2025.58535  Page 0

81. Design of testbed system based on infinite cycle algorithm for liquid flowmeter calibration
SERKAN DİŞLİTAŞ, Murat Alparslan Güngör
doi: 10.5505/pajes.2025.19947  Page 0

82. Desing of Class AB EDDCC+ with the Feature of Electronic Tunability
Tayfun Unuk, Tolga Yucehan
doi: 10.5505/pajes.2025.22823  Page 0

83. Determination of Maximum Train Load Amount for Kars-Ahılkelek Line with the Statistical Methods
Muammer Tahtalı, Yasin Ertaş
doi: 10.5505/pajes.2025.08703  Page 0

84. Establishing a sustainable quality assurance model through strategic management: a case study in a developing state university
Mustafa Egemen Taner, Samet SADIRLI
doi: 10.5505/pajes.2025.48323  Page 0

85. FPGA Prototyping: On-chip Debug Module for RISC-V Based SoC and Testing Processes Using Raspberry Pi with OpenOCD over JTAG
Sezen Bal, Hayriye Korkmaz, Doğukan Biçer, Celal Alperen Bayar, Eren Kale, Eray Kayailli, Armağan Bi
doi: 10.5505/pajes.2025.95694  Page 0

86. Impact of Titanate Coated Magnetite Nanoparticles on the Properties of Rigid Polyurethane Foams
Buse Fem Yılmaz, Meral Akkoyun Kurtlu, Sibel Tuna
doi: 10.5505/pajes.2025.67016  Page 0

87. Investigating the mechanical behavior of the human lumbar spine model by using finite element method
Berna Seval Doğan, Mustafa Özkaya
doi: 10.5505/pajes.2025.93395  Page 0

88. Polybrominated Diphenyl Ethers in Surface Water Sources and Sediments of the Konya Closed Basin and Environmental Risk Assessment
Arzu Ulvi, Senar AYDIN (Ozcan), Mehmet Emin AYDIN
doi: 10.5505/pajes.2025.68639  Page 0

89. Production of nanofibers containing postbiotics using electrospinning method
Aleyna Sure Öztürk, Ahmet Koluman
doi: 10.5505/pajes.2025.23429  Page 0

90. Renewable energy production in Artvin Çoruh University ANG Botanical Garden: Potential, application and challenges
Adalet KESKİN, Elanur ADAR YAZAR, Kadir DOĞANŞAHİN
doi: 10.5505/pajes.2025.78245  Page 0

91. Synthesis, Characterization, and Photocatalytic Performance Evaluation of Manganese Tungstate for Methyl Red Dye Degradation
Mehmet Kayhan, Emine Kayhan
doi: 10.5505/pajes.2025.27723  Page 0

92. The Effect of Forming Process on the Corrosion Characteristics of DX51D Galvanized Steel Sheets
Alaaddin Toktaş, Mustafa Dülger, Gülcan Toktaş
doi: 10.5505/pajes.2025.63838  Page 0

93. The Role of Welding Parameters in Enhancing Joint Strength and Durability for AISI 1040 and 316 Steels
Yalçın Yaşar, İbrahim Aslan, Halil Burak Kaybal, Harun Yaka
doi: 10.5505/pajes.2025.74611  Page 0

94. Two and four-way Wilkinson power divider with slow-wave microstrip structures
Mehmet Cakır, Ceyhun Karpuz
doi: 10.5505/pajes.2025.24615  Page 0

95. Upgraded bio-oil production with catalytic co-pyrolysis of spruce sawdust
AHMET RASİM GİRİŞEN, HAKAN OZCAN
doi: 10.5505/pajes.2025.01679  Page 0

96. Zerde (yellow rice pudding) prepared using different spices: Biological activity, physical properties, textural properties and aroma profile
Nebahat Kıratlı, Seher Arslan
doi: 10.5505/pajes.2025.15829  Page 0

LookUs & Online Makale